P/N 1604010 Rev D (ECN 35207) 2-1 Multi-Control Operation Manual
Section 2 - Operation
Section 2 - Operation
Introduction to Multi-Control (MC)
The microprocessor based GrowSmart Multi-Control provides the latest technologies in combining distribution
network management with control of major components used throughout a micro-irrigation application.
Using both wired and wireless networking, the controller communicates output controls and zone irrigation sched-
uling. Integrating these components provides the benets of efcient water and chemical delivery, sensor monitor-
ing, temperature protection, and system awareness.
The Micro-Control allows for establishing multiple irrigation plans and remote control through FieldNET (Lindsay’s
integrated irrigation management platform, available on the web or on Apple iOS and Google Andriod mobile
devices).
A typical Micro-Irrigation System is made up of the following components. The GrowSmart Micro-Control is ca-
pable of monitoring all of these system functions.
Typical System layout
• Head System
• Multi-Control
• Water Supply
• System Flow Meter
• System Pressure Sensor
• Chemical Injection System
• Injector Flow Meter
• Filtration System
• Post-Filter Pressure Sensor
• Distribution Network
• Pipes
• Pipe Fittings
• Sprinklers and Valves
To Next Page
Loading...