GS-5 Standard Controls
General Safety Instructions
WARNING
Repairing the System: In the event that the Zimmatic System needs to be repaired;
disconnect the power source, depressurize the system and contact the Lindsay Dealer.
Only a Lindsay Dealer should make necessary repairs to the system.
Ensure that only Genuine Lindsay Parts are used on the system.
WARNING
Overhead Maintenance: Overhead maintenance should be performed by a Lindsay Dealer.
Never attempt to climb on an irrigation machine for any reason.
WARNING
Lifting Components: Extreme care is needed for lifting components during installation/
assembly. Only a Lindsay Dealer using the proper lifting equipment may perform this task.
Use caution when lifting heavy objects. Components weighing in excess of 50 lbs. (22.7 kg.) must be lifted with
the assistance of another individual or mechanical lifting device.
Do not work or stand under system or components during assembly. Due to the weights involved, severe injury or
death can result if components should fall.
WARNING
Dismantling the System: If it is ever necessary to dismantle a Zimmatic System, extreme
care must be taken. As with installation and assembly, dismantling must only be performed by a Lindsay
Dealer.
WARNING
Impaired Safety Protection: Do not attempt to operate if protection may be impaired. If the
equipment appears to have been changed or operates abnormally, protective devices may be impaired.
Do not attempt to operate and have the equipment serviced by a Lindsay Dealer.
WARNING: Ensure that power is turned off/disconnected before removing any protective covers.
WARNING: Do not use this product in a manner not specied in this manual.
CAUTION
Prepare for Emergencies; Be prepared for any emergency that may occur. Keep emergency
numbers for doctors, hospital, ambulance service and re department near your telephone.
To Next Page
Loading...