De t a i l s
Constant Memory
As you adjust an effect (say, a Screamer distortion running in effect memory A of FX
Unit 1), those adjustments are retained as you switch away to a different A/B/C memory
and back again—no save function is required. It’s just as if you were adjusting different
physical stompboxes, each of which would still have the last knob settings you made to
it. The same is true as you switch scenes, swapping one virtual pedalboard for another:
when you come back to a previously used scene, it loads with all the last adjustments you
made to it, just like a real pedalboard of physical stompboxes would.
If you prefer that scenes not remember your last adjustments, hold the LOOPER
CONTROLS footswitch to activate SETUP mode, then set the Scenes parameter
to MNLSAVE (Manual Save) instead of AUTOSAVE. You will then need to use the
scene setup mode any time you want to manually force a “save” of current settings to a
scene: hold SCENES, step on the switch for the current scene, then step and hold on
that same switch again to complete the “save” (display will say Copy Completed).
Tap Tempo
Tap tempo is available for all Delay effects, most Mod effects, and some Filter effects
(details at www.line6.com/manuals). For these effects, turn the second top row knob
of the FX Unit all the way to max, and you’ll switch between tap tempo and regular con-
trol modes. Once you’re in tap tempo control mode, turn the knob to select one of the
available note values. Tap 2 or more times on the TAP switch, and all the effects set to
tap tempo control will change their time/speed/tempo to match the tempo you tapped.
To end tap tempo operation for an effect, turn the knob to max again.
Note: Parameters set to tap tempo control are NOT affected by expression pedal
operation.
Mono/Stereo
Some Models (like Stereo Delay) provide stereo operation. When run before a mono
model (like a distortion), the signal will collapse to mono as it feeds the mono
effect, and will then be passed on in mono to the next effect or outputs.
To Next Page
Loading...
Need help?
General
