Need help?Do you have a question about the Line 6 Firehawk FX and is the answer not in the manual?
General| Amp Modeling | Yes |
|---|---|
| Footswitches | 5 |
| Looper | No |
| Tuner | Yes |
| Bluetooth | Yes |
| USB | Yes |
| MIDI | Yes |
| Expression Pedal | Yes |
| Power Supply | Included |
| Presets | 128 |
| Effects | Over 200 effects and amp models |
| Outputs | 1/4" outputs, XLR outputs, Headphone output |
Covers general warnings, cautions, and detailed safety guidelines for operation and handling.
Details trademarks, FCC compliance, and CE marking information for the device.
Introduces the Firehawk FX, highlighting its capabilities and core features for guitarists.
Describes the functionality and benefits of the companion mobile application.
Provides a visual layout and initial introduction to the controls on the top panel.
Explains the LCD display, Bluetooth pairing, and onboard tone adjustment controls.
Details the function of the Master Volume knob and its surrounding LED indicator ring.
Describes the function of the five FX footswitches for toggling effect blocks on/off.
Guides on loading, saving presets, and identifying unsaved changes via indicators.
Details tap tempo, tuner functionality, and how to configure pedal modes and ranges.
Explains the onboard expression pedal's modes and external pedal connection.
Describes connections for guitar input, effects loop, main outputs, and headphones.
Explains how to connect Variax guitars and use the USB port for audio interface functions.
Details the power supply input and the main power switch location.
Covers the menu/back button, preset title display, and signal flow pane.
Explains how to view, select, and manipulate processing blocks in the signal chain.
Details how to adjust parameters and assign footswitches to FX blocks within the app.
Lists and briefly explains various functions available in the app's main menu.
Explains how to connect and configure Variax guitars with the Firehawk FX.
Details how the OUTPUT MODE switch affects XLR and 1/4-inch output signals.
Provides steps for performing a factory reset and calibrating the expression pedal.
To Next Page