Need help?Do you have a question about the Line 6 POD HD500X and is the answer not in the manual?
General| Expression Pedal | Yes |
|---|---|
| USB | Yes |
| Type | Multi-effects processor |
| Amp Modeling | Yes |
| Cab Modeling | Yes |
| Presets | 512 |
| Effects | Over 100 |
| Display | LCD |
| Inputs | Guitar input, Aux input, Mic input, Variax input |
| Outputs | 1/4" Main, XLR Main, 1/4" Headphone, S/PDIF |
| MIDI | In/Out |
| Computer Connectivity | USB |
| Power Supply | Included |
| Footswitches | 8 rugged footswitches |
| Looper | 48 seconds (24 seconds in stereo) |
Essential safety guidelines for operation, including environmental and cleaning advice.
The LCD screen as the primary interface for information and interaction.
Control for selecting and managing presets and set lists.
Connection for an expression pedal to control volume, wah, or other parameters.
Input for connecting a guitar, with optional PAD switch for high gain.
Input for connecting external audio sources like CD or MP3 players.
1/4" outputs for connecting to amplifiers, recorders, or mixers.
XLR outputs for ideal connection to digital recorders or live mixers.
Headphone jack for private listening, volume controlled by Master Volume.
Mono input for a second guitar or other instrument.
Input for microphones, with MIC LEVEL control for healthy signal.
Stereo FX SEND and RETURN for integrating external effects.
Direct digital connection for Line 6 Variax guitars.
Digital output for sending 24-bit versions of direct signals.
Connect to MIDI equipment for preset selection and program changes.
Describes the placement and states of Amp Blocks in the signal flow.
Detailed parameters for adjusting Amp, Cabinet, and Microphone models.
Details on using and configuring the 8 FX Blocks and FX Loop.
Controls for individual path level and pan adjustments before the output.
How to assign expression pedals to control FX parameters.
Configuration of foot switch modes, display settings, and looper behavior.
Selection of hardware inputs as sources for your patches.
Configuration of analog output modes for direct recording or amp connection.
Settings for configuring the S/PDIF digital output signal.
Configuration of MIDI channels and tempo synchronization settings.
Settings for controlling Line 6 Variax guitars via the POD HD500X.
Configuration for connecting to Line 6 DT50 amplifiers.
Step-by-step guide to calibrate the expression pedal for optimal functionality.
To Next Page
