Need help?Do you have a question about the Line 6 Helix and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| Inputs | 1 x XLR (mic) |
| Outputs | 1 x 1/4" (headphones) |
| Display | 6.2" LCD |
| Footswitches | 12 |
| Connectivity | MIDI In/Out, USB, S/PDIF |
| Power Supply | Internal power supply (100-240V) |
| Amp Modeling | Yes |
| Software | Helix Edit |
| Expression Pedal | Built-in |
| USB | Yes |
| Presets | 1024 |
| Looper | Yes (up to 60 seconds) |
Lists the items included in the Helix package.
Defines key terms used throughout the manual for clarity.
Guides users on configuring audio output levels for playback systems.
Explains how to navigate and select presets and organized setlists.
Details how to use footswitches for preset navigation.
Describes the specialized mode for controlling the Looper block via footswitches.
How to select and adjust parameters of blocks using Pedal Edit mode.
Explains how to turn individual blocks on or off.
Guides on selecting and changing the specific model within a block.
How to select the input source for the signal path.
How to select the output destinations for the signal path.
How to reposition blocks within the signal path.
Method for duplicating blocks within or between presets.
How to remove single blocks or reset all processing blocks.
Instructions for saving and naming custom presets.
Explains different signal path configurations for tone shaping.
How to remove parallel paths and move split/merge blocks.
Describes True Parallel and Super Serial routing setups.
Explains how the device manages processing power for models.
Advice on managing processing resources for better tone.
Guidance on arranging blocks and achieving stereo width.
Overview of Line 6 Variax guitars and their integration.
Configuration options for audio input sources.
Configuration options for audio output destinations.
Details on using the digital L6 LINK connection.
Lists available EQ, Distortion, and Dynamics effect models.
Lists available Modulation, Delay, Filter, Wah, and Volume/Pan effects.
Describes common parameters applicable to many effects blocks.
Lists available Amp models and their parameters.
Lists available Cab models and their characteristics.
Instructions for importing user-created impulse responses.
Parameters for configuring microphone and cab settings for IRs.
Parameters for configuring Impulse Response blocks.
Adjusts signal levels sent to and received from external devices.
Parameters for using external stompboxes or rack effects.
Parameters for configuring the Looper block.
Explains different ways to split and merge signal paths.
Configuration options for the built-in chromatic tuner.
Quickly assigns blocks to footswitches.
Manually assigns blocks to footswitches with detailed options.
How to add custom labels and change LED colors for footswitches.
Quickly assigns controllers to parameters.
Manually assigns controllers to parameters with detailed options.
Tips, clearing block, and clearing all controller assignments.
How to send MIDI, CV, or external amp control messages.
Details on MIDI CC, CV, Bank/Prog, Note On, MMC, Ext Amp commands.
How to copy, paste, and clear commands.
How to add custom labels and change LED colors for command footswitches.
Restores Global EQ settings to factory default.
Restores all Global Settings to factory default.
Configures input and output routing and levels.
Configures MIDI and tempo settings.
Customizes footswitch behavior and modes.
Adjusts display settings like LED brightness and shows firmware info.
Explains how to manage audio monitoring sources.
Techniques for recording dry DI signals and re-amping.
Configures ASIO driver settings for low-latency Windows audio.
How to use MIDI Bank and Program Changes for recall.
Details on using MIDI Continuous Controller messages.
To Next Page
