Line 6 POD HD500X Advanced Guide

Overview
1•2
At the bottom of the Signal Flow View screen, you’ll see up to four parameters that are
accessed using the Multi-function knobs 1-4.
Accessing parameters with the Multi-select Knobs
These parameters are specic to the currently selected Block and allow you to choose
new Models & edit parameters. Or, you can dive deeper in the Edit Mode and access
additional settings in other screens, as covered in the following chapters.
Performance View
The Performance View screen displays the FX and/or Presets that are currently assigned
to your POD HD500X footswitches. Footswitches
FS5 - FS8 can be congured to either
toggle FX On/O, or to select Preset channels (see “Page 1, Setup: Utilities Options” on
page 2•1).
FX assignment for FS1-FS8 ABCD assignment for FS5-FS8
These FX assignments for FS1 - FS8 can be edited for each Preset (see “FX & Amp Block
Footswitch Assignment” on page 3•9). When the Looper is active, the Performance
View screen displays a set of Looper functions (see “Looper Mode” on page 8•1).

Line 6 POD HD500X Specifications

General

Expression Pedal	Yes
USB	Yes
Type	Multi-effects processor
Amp Modeling	Yes
Cab Modeling	Yes
Presets	512
Effects	Over 100
Display	LCD
Inputs	Guitar input, Aux input, Mic input, Variax input
Outputs	1/4" Main, XLR Main, 1/4" Headphone, S/PDIF
MIDI	In/Out
Computer Connectivity	USB
Power Supply	Included
Footswitches	8 rugged footswitches
Looper	48 seconds (24 seconds in stereo)