Quick Start Guide
1•1
Quick start Guide
or:
“Manual? I don’t need no stinking
manual!
”.
1. On the rear panel, turn the small Output LeveL knob all the way down to zero,
flip the switch to the amp position if you’re plugging into an amp, or the line
position if you’re plugging into line level equipment such as a recorder or mixer,
or using only headphones.
2. Connect the Left and Right Outputs to your recorder or mixer’s inputs, or
plug the left output into your guitar amp’s input. Or connect headphones to the
p
hOnes jack on your PODxt Live for silent jamming.
3. Connect the included power pack to your PODxt Live, and plug the other end
into a power jack.
4. Connect your guitar to PODxt Live’s input. Flip the switch there to nORm for
most guitars or Pad for extra-hot-output pickups.
5. Got a Variax guitar? Connect it to the PODxt Live’s rear panel Variax jack, us-
ing only Line 6-supplied Variax cables. See Variax on page 3•2.
6. Flip the rear panel pOweR switch to fire up.
7. Press the Output mOde/system button. Press the button below dest (Destina-
tion), then turn the effect tweak knob to tell your PODxt Live what you’re
connecting to. This setting will be overridden when you plug in headphones, so
you don’t have to do anything to get great headphone sound.
8. Turn up the rear panel Output LeveL knob so you can hear PODxt Live’s output,
but don’t turn up so high that you’re overdriving the input of whatever you’re
plugging into.
9. Turn the seLect knob to choose from preset sounds, organized in 32 Banks of 4
Channels, with Channels labeled A, B, C, D. Banks 1-8 are great for use with
headphones, mixers and recorders. Banks 9-16 are designed for in front of an
amp. Banks 17-32 are ready to fill with your own sounds, or ones you download
from the Line 6 web site. With the edit button NOT lit, press the left button
under the display for “manuaL Override,” where-the-knobs-are-is-how-it-sounds
operation.
10. Step on the amp, stOmp, mOd, or deLay switches to turn those parts of your
sound on/off. Turn the knobs to further adjust. chan vOL adjusts the volume of
this Channel Memory relative to the others.
Now before you run off, please give the page a quick flip and....
To Next Page
Loading...
Need help?
General
