Line 6 POD XT - Page 33

To Next Page

To Previous Page

Controls & Connections PODxt Pro

2• 10

PODxt Pro

The following controls and connections are found on the PODXT Pro only.

Input Level - The Normal setting of this switch is appropriate for most

guitars. If you see the Clip light coming on, that means you’re overloading POD

Pro’s input. If that happens frequently, try the Pad setting here. This switches in input

circuitry that’s appropriate for hotter signals output by some guitars with active pickups,

or from keyboards and other sources. For those non-guitar sources you may also want to

try the rear panel Line Level Input , which is a balanced TRS connection. A

separate CLIP indicator shows in the display if you are clipping in the internal DSP.

I/O & Dig Select - Press this to tell your PODXT Pro what it’s connected to

so it can give you the best sound, and to choose digital audio and other options.

• Press it once to select where you’re going to connect your input source to the

PODxt Pro, and exactly what you want to come out of the digital outputs.

• Press it a second time to tell POD

XT Pro whether you’re using it in the studio or

live, how you have connected your effects loop and what kind of digital gear you

have connected to POD

XT Pro.

• Press it a third time and it will dismiss the pages and take you back to whatever was

in the display before you pressed the button.

Signal Light - This lights to say, “Yep, I’m hearing some input.” If you’ve got

something feeding audio to your POD

XT Pro but you can’t hear it and don’t see it here,

press the I/O & DIG SELECT button and be sure you’ve got the right input

selected. (This light doesn’t show input from USB, by the way.)

Clip Light - This lights to say, “Whoa, Nelly! That’s too much input!” (And,

again, it doesn’t show the status of USB audio.) Reduce the output level of the device

that’s feeding your POD

XT Pro, or try the Pad setting of the handy Input Level

switch. For non-guitar sources, you may instead want to use the...

FEATURE FOCUS

PODxt Manual Book RevC.book Page 10 Friday, August 29, 2003 5:43 PM

Other manuals for Line 6 POD XT