Linear LDCO850 - User Manual

LDCO850
Smart Wi-Fi Garage Door Opener
DC motor with LED lighting and belt- or chain-drive rail
Homeowner’s Manual
Printed in China for GTO Access Systems, LLC.
Copyright
©
2017 GTO Access Systems, LLC
Document Number: 10014541 REV-D (07-11-17)
• Please read this manual and included safety information carefully.
• After the opener is installed and working properly, use your smart phone to
download, and activate the Linear PRO Access Smart Control app (page 10).
Important Safety Information ............................... page 1
Using the Garage Door Operator ........................ page 2
Manual Disconnect .............................................. page 3
Testing the Safety Beam ..................................... page 4
Adjusting the Open and Close Limits .................. page 5
Automatic Door Force Setup ............................... page 6
Safety Reversal System Test ............................... page 6
Programming Remote Controls ........................... page 7
Programming Keypad Codes .............................. page 8
Setting Up the Wall Station ................................. page 9
Maintenance ...................................................... page 11
Troubleshooting ................................................. page 13
Warranty ............................................................ page 14
WARNING
To reduce the risk of injury to persons – Use this
opener only with sectional residential overhead doors.
Do not use on one piece or swing doors.
Installer’s Contact Information:

Summary

Important Safety Information

CAUTION

Indicates possibility of damage to the garage door or opener.

AWARNING

Indicates possible mechanical hazards causing serious injuries or death.

Important Safety Instructions

Key steps to reduce risk of severe injury or death before proceeding with installation.

Using the Garage Door Operator

Opening the Door

Steps to open the garage door using the wall station, remote control, or wireless keypad.

Closing the Door

Steps to close the garage door using the wall station, remote control, or wireless keypad.

Stopping the Door Mid-travel

How to stop the garage door while it is in motion.

Manual Disconnect

Disconnecting the Door from the Opener

Steps to manually disconnect the garage door from the opener.

Testing the Safety Beam

Safety Beam Test

Procedure to test the safety beam alignment and functionality.

Adjusting the Open and Close Limits

Adjusting the Open Limit

Steps to set the desired open position for the garage door.

Adjusting the Close Limit

Steps to set the desired close position for the garage door.

Automatic Door Force Setup

Automatic Door Force Setup

Process for the opener to automatically measure and adjust door force.

Safety Reversal System Test

Safety Reversal System Test

Procedure to test the door's safety reversal mechanism.

Programming Remote Controls

To Add or Remove a Remote Control

Instructions for adding or removing remote controls to the opener.

To Remove All Remote Controls

Procedure to erase all programmed remote controls from memory.

Replacing a Remote Controls Battery

Guide on how to replace the battery in a remote control.

Programming Wireless Keypad Codes

To Add or Remove a Wireless Keypad Code

Instructions for adding or removing keypad codes for the opener.

Replacing the Keypads Batteries

Guide on how to replace the batteries in the wireless keypad.

Setting Up the Wall Station

Test Wi-Fi Signal Strength with Your Smart Phone

Guidance on checking Wi-Fi signal strength for wall station connectivity.

LEDs on the Wall Station

Explanation of the LEDs on the wall station and their meanings.

Smart Control App Installation

Add Your Device

Steps to add garage door and light devices to the smart control app.

Use the App

How to operate the garage door and light using the smart control app.

Manage Your Devices and Members

Instructions for managing devices and inviting members to the app.

Maintenance

Every Month

Monthly maintenance checks for the garage door opener and door.

After Servicing the Opener

Tests to perform after servicing the garage door opener.

Every 6 Months

Semi-annual checks for belt or chain tension.

Belt Adjustment

Procedure to adjust the belt tension on a belt-drive opener.

Chain Adjustment

Replacing the Back-Up Battery

Troubleshooting

Door Operation Troubleshooting

Troubleshooting common door operation issues based on flashes/beeps.

Battery Troubleshooting

Troubleshooting issues related to the battery backup system.

FCC Notice

Limited Warranty

Warranty Coverage Details

Details of warranty periods for electronics, mechanical, motor, belt, and chain components.

Linear LDCO850 Specifications