For Android phones: iPhone:
When installing the LINGDU APP, it will have two pop-up prompts, select
‘While using the APP’ to allow LINGDU to access this device's location, and
select ‘Allow’ to allow LINGDU to access photos and media on your
device.There is one extra step you will have to take for the first time. Once
you connect to the WiFi of D500, it will say ‘No Internet’. Which is fine. Wait
about 10-15 seconds until you see the below pop up or notification. You
just have to tap on the pop up notification that will show up in few
seconds to select that you still want to stay connected even though there is
NO Internet. Once you select this OK, you are set to go.
Then touch “YES” to stay connected
to this WiFi and save this preference
Touch here to check this box.
Touch here as soon as you
see this notification
Once you enter the default password for
LINGDU WiFi and hit connect, you will
see this pop-up in few seconds.
LINGDU
D500
If you get this pop up for your iPhone while using WiFi feature, make
sure to tap on ‘Keep Trying WiFi’. Otherwise the camera will get
disconnected from the WiFi and then you will have to forget the
LINGDU WiFi and then start to pair again to make it work again.
EN-21 EN-22
To Next Page
Loading...