Go to Dashcam Preview
interface. Please STOP
recording first, then press the
settings icon.
Select what you need
to set.
9. General Setting
1
2
9.1 Video Settings
Video Resolution
Allow to choose the desired video resolution and fps(frames per second).
Loop Recording — 1min(Default)/ 2mins/3mins
Please select the length of each video clip (1/2/3 minutes) forloop
recording. This function enables continuous recording on the dash cam.
Please note that when the memory card becomes full, the dash cam will
automatically delete the oldest files to make space for new recordings. This
ensures that it can continue recording without interruption.
WDR— On(Default)/Off
WDR stands for "Wide Dynamic Range," which means the camera or
display can adapt to scenes with large differences in brightness, allowing
details in both dark and bright areas to be clearly displayed.
Exposure —-3.0/ -2.0/ -1.0/ +0.0(Default)/ +1.0/ +2.0/ +3.0
To adjust video exposure setting for either brighter or darker video
accordingto your preference.
Audio Recording — On(Default)/Off
The dashcam has built-in microphone to record audio with video. You can
choose to record mute video by choosing OFF.
G-Sensor — Off/ Low(Default)/ Medium/ High
G-sensor is a 3-axis impact gravitational accelerometer, designed to detect
physical and gravitational forces on the dash cam. Once G-sensor has been
triggered due to physical or gravitational impact force on the camera, the
current video file will be locked as an emergency file so it won't be deleted
by loop cycle function. The higher the G-Sensor sensitivity is, the less force
will be needed to trigger automatic file protection.
EN-23 EN-24
To Next Page
Loading...