Note:
Custom-designed Type-C 3-Lead Hardwire Kit is required to use
this new feature. Not included in the packaging, on Amazon search:
Type-C 3-Lead Hardwire Kit for LINGDU D500 Dash Cam
Press the icon to
download the video
files.However, it will take a bit
of time to download one
video file.
Parking Mode
This function will ONLY work when 3-Lead Hardwire Kit is installed
properly. This parking mode has three options to choose from.
*Collision Detection Parking Mode:
1. When you turn OFF the car's engine and turn the key to the lock position.
Then the camera will STOP the continuous video recording and it will go
into the impact detection mode and the camera will turn OFF.
2. Now while the camera stays in impact detection mode, if someone hits
your car and if the impact reaches the set G-Sensor level, then the camera
will turne ON > then it will start to record 1-min continuous video, save &
lock that video in Event folder > then the camera will turn OFF.
3. Now when you start your car for the next time, the camera will
automatically go back into normal video mode automatically to start the
continuous video recording.
*Normal Recording Parking Mode:
1. When you turn OFF the car’s engine and turn the key to the lock position.
The camera will continue to record normally.
2. Now the camera stays in impact detection mode, if someone hits your
car and if the impact reaches the set G-Sensor level, then the camera will
lock the current looping video clip, save & lock that video in Event folder >
then the camera will continue to record normally.
Fatigue Driving Reminder— Off(Default)/ 2H
When you activate this feature, the dash cam will beep every 2 hours to
remind you if you are experiencing fatigue while driving.
*Time-Lapse Parking Mode:
1. When you turn OFF the car's engine and turn the key to the lock position.
Then the camera will STOP the continuous video recording and it will go
into the timelapse 1fps recording mode automatically.
2. Now while this timelapse is being recorded, if someone hits your car and
if the impact reaches the set G-Sensor level, then the camera will start to
record 1-min continuous video, save & lock that video in Event folder > then
return to the timelapse 1fps recording.
3. Now when you start your car for the next time, the camera will
automatically STOP the timelapse parking mode. Then it will go into
normal video mode automatically to start the continuous video recording.
EN-25 EN-26
To Next Page
Loading...