LINGDU D500 - Page 16

Note:
Kindly be informed that the voice control feature has an accuracy of
approximately 90%, and it may get activated unintentionally due to
surrounding environmental noises. Hence, if you do not require this
function, you can deactivate it from the settings menu in the LINGDU APP.
9.2 Video Stamps
Screen Save— Screen Saver Off(Default)/ Screen Off After 1-Min
Screen Saver Off: This screen will always be on.
Screen Off After 1-Min: The screen will turn off after 1 minute of inactivity.
Frequency — 50HZ/ 60HZ(Default)
Here you should choose the frequency accordingly to your power supply
specification used in your country based on your geographical location.
Date/Time Format
Thie feature allows you to select the date format.
Speed Unit — KM/H/MPH(default)
Choose between MPH and KMH
GPS Info
Check the satellite number / Longitude / Latitude / Speed.
Volume — Off/ Low(Default)/ MID/ High
This feature allows you to set the volume level for the boot sound volume,
prompt volume through camera’s internal built-in speaker.
Boot Ringtone — On(Default)/ Off
This feature allows you to turn ON/OFF the camera’s Boot Ringtone.
Voice Control — On(Default)/ Off
ONLY support English: turn on WiFi, take picture, turn off recording, turn off
WiFi, open recording, lock the video.
Voice Command
Say a command, but ONLY support English
•To turn on WiFi, say Turn on WiFi
•To turn off WiFi, say Turn off WiFi
•To take a picture, say Take picture
•To lock the current video files, say Lock the video
•To start recording, say Open recording
•To stop recording, say Turn off recording
•To open screen, say Open screen
•To turn of screen, say Turn off display
Speed
Turn On/Off the Speed Stamp shown on recorded files.
GPS Information
Turn On/Off the GPS Information Stamp shown on recorded files.
Date/Time
Turn On/Off the Date/TimeStamp shown on recorded files.
EN-27 EN-28