Introduction
Thank you for purchasing this product. For proper installation and optimum
performance, please read the instructions in this manual carefully.
LINK EXT40-4K is a slim transmitter receiver pair, which can extend HDMI
1080P@60Hz signals up to 70m/230ft and 4K@60Hz (chroma sub-sampling
4:2:0 8-bit only) signals up to 40m/130ft via a single Cat 6a/7 cable. It features
bi-directional PoC. It also supports bi-directional IR and RS232 pass-through.
Features
• Supports resolutions up to 4K@60Hz 4:2:0 8bit and HDCP 2.2.
• Over a Cat 6a/7 cable, extends 4K@60Hz 4:2:0 8bit up to 40m/130ft and
1080P up to 70m/230ft.
• Over a Cat 5e/6 cable, extends 4K@60Hz 4:2:0 8bit up to 35m/115ft and
1080P up to 60m/200ft.
• Bi-directional PoC, one power adapter at either transmitter or receiver
side can power both units.
• Supports bi-directional IR and RS232 pass-through.
Package Contents
• 1 x EXT40-4K Extender Set
• 1 x Power Adapter (DC 18V 1A)
• 1 x IR Emitter
• 1 x Broadband IR Receiver (30-50 KHz)
• 1 x IR-AC IR Coupler Cable
• 2 x 3.5mm 3-Pin Phoenix Connector
• 4 x Mounting Brackets (with Screws)
• 1 x User Manual
To Next Page
Loading...
