EasyManuals Logo

Link SC360 User Manual

Link SC360
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Installation Guide
4 18-HD95D1-1C-EN
4. Trane
®
& American Standard
®
Link Systems
Installation. Trane and American Standard
Link systems are built to be “plug and play”.
Once you’ve connected the outdoor unit,
indoor unit, SC360, and UX360, turn on the
system. The equipment will communicate
and configure the system automatically to
default settings.
Verication. You can easily verify all modes
of operation. Link can run and verify each
mode of operation as well as verify the
system is functioning properly. For example,
instruct the system to deliver 1200 CFM of
airflow, and the system will verify correct
operation. Once testing has been completed,
you can get a commissioning report that
documents the results.
Monitoring. With a homeowner’s
permission, you can monitor data from the
system remotely. This includes creating a
birth certificate that captures how the system
was operating on day one, and tracking
performance over time.
Upgrades. Connected systems can have
their software remotely upgraded through
the SC360, including pushing additional
features out to the installed communicating
equipment. No dealer visit or SD cards are
required.
Technical Advantages
Self-configuring system on startup
Automated verification simplifies charging
and airflow procedures, and automatically
goes through all modes of operation to verify
the system is operating properly and within
specifications
New sensors to easily monitor data, with
information shared wirelessly, either onsite
or in the cloud
Standardized and consistent wiring: four-wire
connection for all communicating equipment
simplifies installation
Faster, more robust communication protocol
SC360 controls all system decisions, and
has Temperature and Humidity sensing
capabilities as well as Wi-Fi and BLE
communications on-board.
Remotely control connected systems from
the Home mobile app.
The system supports up to four indoor
temperature and humidity sensors in a
non-zoned system for averaging, including
ZSENS930AW00MA sensors.
Download the Trane Diagnostics or American Standard Diagnostics mobile app from the
Google Play Store or App Store
®
.
All trademarks referenced are the trademarks of their respective owners. Google is a trademark of Google LLC.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Link SC360 and is the answer not in the manual?

Link SC360 Specifications

General IconGeneral
BrandLink
ModelSC360
CategoryController
LanguageEnglish