Field Electronics Setup Guide FTC_PIT
Rev 10 1/23/2013 17 ©2012 FIRST Tech Challenge
After the changes have been successfully saved, hit the “Continue” button and log in with userid “admin” and the
password you just defined.
When the dialog opens, click on the Setup tab, then Basic Setup.
1. Ensure the Internet Connection Type is set to Automatic Configuration - DHCP
2. Change the IP address to 192.168.1.1.
3. Set the starting IP address and the max number of users to 100.
4. Set the time zone appropriately.
5. Critical: Save the settings. A message will appear asking you to “Continue” Click Continue to refresh
the router to the new IP address setting.
To Next Page
Loading...
