Field Electronics Setup Guide FLASH DRIVES
Rev 10 1/23/2013 24 ©2012 FIRST Tech Challenge
5.4. Create Secondary Network Key Folder:
Plug in a 2GB flash drive (Use the same flash drive you used to create FTCNTKY)
From your Start menu choose: >Samantha Field Control System>Samantha Network Config
The following dialog box will open:
Enter FTC_PIT in the Primary Network Name (SSID) field.
Network Authentication: WPA2-PSK
Data Encryption: AES
Network Key: GETOVERIT!
Confirm the network key and click “Save”.
Following popup will appear:
Click “OK”. This will encrypt the password and change it on your input screen.
The illustration shows the encrypted Network key.
Your flash drive should now have a SMRTNTKY folder.
Click “Exit” to close the Samantha Network Setup.
Suggestion: Make a folder on
your hard drive and copy the contents of the flash drive to it. Make
additional flash drives by copying the files from this folder as needed.
To Next Page
Loading...
