EasyManua.ls Logo

Linksys easyHOTSPOT WRT54GL - Instructions for Customers

Linksys easyHOTSPOT WRT54GL
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 12
6. Instructions for Customers
Instructions for logging in from a Windows PC:
1. The PC should be setup as follows:
Wireless network Interface
Encryption (WEP, WPA, …) = Off
Internet Protocol TCP/IP
Obtain an IP address automatically
Obtain DNS server address automatically
WWW browser
set to not use a proxy server
2. Use your normal method to scan and connect to the wireless network
for this hotspot.
3. Start your web browser. Common web browsers are Internet Explorer
or Firefox.
4. Enter the Username and Password found on your ticket.
5. Once you have successfully logged on, your PC will have full Internet
access, including WWW, email, etc.
Users are logged off in a number of different ways:
1. Use the logoff button in the pop-up provided when logged in.
2. If the pop-up has been closed, return to the logout page by visiting the
following www page with your web browser:
http://192.168.182.1:3990
3. Turn off the PC or leave the hotspot coverage area. After a fixed
timeout, you will by logged off automatically.
4. Leave the PC on, but do not access the Internet for a fixed time. After a
fixed time of inactivity, you will be logged off automatically.

Related product manuals