Linksys easyHOTSPOT WRT54GL - Testing

Page 6
2.4. Testing
After the easyHotspot has been installed and power applied, the front panel
should look like this:
Light (LED) Should be ….
CiscoSystems
Button
Change between ON and OFF by
pressing the CiscoSystems button for 1
second. The change is semi-permanent:
if power is removed and re-applied the
state (ON or OFF) is restored to the
same as it was when power was
removed.
OFF: (default) Users with valid tickets do not have
access to any device on the network (LAN) connected
to the Internet rear socket. Their data traffic can pass
through this network to get to the Internet.
ON (orange colour): Users with valid tickets do have
access to both the Internet, and devices on the
network connected to the Internet rear socket.
Power ON
DMZ OFF
WLAN ON (blink occasionally)
Ethernet 1,2,3,4 ON: If a LAN cable is plugged into the corresponding
rear socket.
OFF: Otherwise
Internet ON: (Blink occasionally)