Page 7
Using a laptop (or other WiFi enabled computer)
• Use the wireless networking utility provided with the computer to
connect to easyHotspot wireless network. In most cases, the wireless
network name will be easyHotspot. If ordered with a custom
configuration, the wireless network name may be different. The
wireless network name can not be changed.
• Your PC should have been automatically assigned a network
configuration as below. If not – see section 7 - Troubleshooting.
o IP Address: 192.168.182.2
o Subnet mask: 255.255.255.0
o Default gateway: 192.168.182.1
To see the network configuration on a Windows PC:
• Click Start, then Run…
• Enter cmd and press OK.
• When the command window opens, type: ipconfig and click Enter.
• Open up the internet browser
2
on the PC. You should see a page
similar to this. If not, see section 7 - Troubleshooting..
• Enter the Username/Password pair from a ticket, and click Login.
Some starter tickets are included with most orders. A ticket will look
2
e.g. Internet Explorer, Firefox, etc
To Next Page
Loading...
