Linksys MX2000 Series User Manual

4
Back
Ethernet ports—Connect ethernet cables to these Gigabit ethernet (10/100/1000) ports and to
other wired devices on your network. If you have more than one node in your mesh system, use one of
these ports to connect to your modem or modem-router.
Note—For best performance, use a CAT5e or higher rated cable on the Ethernet port.
Internet port—Connect an ethernet cable to the yellow gigabit (10/100/1000) port, and to a
broadband internet cable/DSL or fiber modem. If you are using this router as a child node in a mesh
WiFi system, you can use this port to create a wired connection to another node.
Power port—Connect the included AC power adapter to this port.

Linksys MX2000 Series Specifications

General

MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
Parental Controls	Yes
Guest Network	Yes
Wi-Fi Technology	Wi-Fi 6
Bands	Dual-Band
Security	WPA3
Device Capacity	25+ Devices
Ports	4 x Gigabit Ethernet
Memory	512 MB Flash