Linksys PAP2

VoiceDirector Device Configuration Guide Linksys PAP2
6. Scroll to the Audio Configuration section (as shown in the Line 1/2 Page
screen on the previous page), and change the following settings:
Field Value
Preferred Codec Select VoiceDirector’s
primary codec.
Use Pref Codec Only no
G729a Enable yes
G723 Enable yes
G726-16 Enable no
G726-24 Enable no
G726-32 Enable no
G726-40 Enable no
DTMF Tx Method AVT
7. Click the Save Settings button to save the settings.
Page 6