Release Notes for SPA942 and SPA962 IP Phones Firmware Version 6.1.3 5
Release Notes
• Speed Dial: The user can press the line button to place a call to the other
station.
To program a line key:
a. Start Internet Explorer, and enter the IP address of the phone. Click the
Admin Login link and then click advanced.
b. Click the Phone tab.
c. Find the Line Key that you want to configure, such as Line Key 1. Enter the
following settings:
- From the Extension drop down list, choose Disabled.
- From the Share Call Appearance drop-down list, choose shared.
- Enter the rule in the Extended Function field, as described below.
SYNTAX: fnc=type;sub=stationname@$PROXY;ext=extension#
@$PROXYvid=#
Example 1: Busy Lamp Field and Speed Dial:
fnc=blf+sd+cp;sub=Accounting@$PROXYext=103@$PROXY
In this example, the line key is programmed as a shared line with extension
103, Accounting. The button can be used for Busy Lamp Field, speed dial,
and call pickup.
• Configuration of missed call display per extension
The user can configure the missed call log function for each extension, to avoid
collecting unneeded missed call messages for shared lines. This option is
found on the Phone > User tab of the Web UI. The Log Missed Calls for EXT N
field can be set to Ye s (missed calls are displayed) or No (missed calls are not
displayed).
Other Updates
The following problems were fixed in firmware version 6.1.3:
• One-way audio between SPA phones with different firmware versions
(CSCsr86185)
To Next Page
Loading...
