Name: Linksys Velop WHW03
Brand: Linksys
Rating: 4 (1 reviews)

To Next Page

To Previous Page

•

If your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s

DSL port.

•

If your computer was previously connected to your modem with a USB cable, disconnect the

USB cable.

•

Install the router again.

Cannot access your Velop

message

To access your Velop, you must be connected to your own network. If you currently have wireless

Internet access, the problem may be that you have accidentally connected to a different wireless

network.

To fix the problem on Windows computers, do the following*:

1. On your Windows desktop, click on the wireless icon in the system tray. A list of available

networks will appear.

2. Click your own network name. Click Connect. In the example below, the computer was

connected to another wireless network named wraith_5GHz. The wireless network name of the

Linksys Velop router, Damaged_Beez2.4 in this example, is shown selected.

3. If you are prompted to enter a network security key, type your password (security key) into the

network security key field. Click OK.

Questions and Answers:

Need help?

Do you have a question about the Linksys Velop WHW03 and is the answer not in the manual?

Linksys Velop WHW03 Specifications

General