Need help?Do you have a question about the Linksys Velop WHW03 and is the answer not in the manual?
General| Wi-Fi Technology | 802.11ac |
|---|---|
| Coverage | Up to 2, 000 sq ft per node |
| Processor | 716 MHz Quad-core |
| Security | WPA2 Personal |
| MU-MIMO | Yes |
| Beamforming | Yes |
| Guest Access | Yes |
| Parental Controls | Yes |
| Dimensions | 3.1 x 3.1 x 7.3 inches per node |
| Maximum Data Transfer Rate | 2200 Mbps |
| Memory | 512 MB RAM, 4 GB flash |
| Ports | 2x Gigabit Ethernet ports |
| Wi-Fi Speed | AC2200 (867 + 867 + 400 Mbps) |
| Wi-Fi Bands | 2.4 GHz and 5 GHz |
| Antennas | 6 internal antennas |
| Product Type | Mesh Wi-Fi System |
| Number of Nodes | 1, 2, or 3 nodes |
| Coverage Area | Up to 6, 000 sq ft with 3 nodes |
| Compatibility | Works with any modem |
Shows the front and top view of the Linksys Velop device.
Details the ports and buttons on the bottom of the Velop device.
Provides resources for additional assistance, including the Linksys website and Smart Wi-Fi help.
Guides users on the initial setup process for the Velop system.
Instructions on accessing and connecting to the Linksys Smart Wi-Fi interface.
Steps to resolve issues when Velop setup does not complete successfully.
Solutions for "Your Internet cable is not plugged in" message during setup.
Steps to fix problems when you cannot access your Velop.
Solutions for when the internet appears to be unavailable after setup.
Instructions on how to restart the Velop device to resolve issues.
Technical details for the Linksys Velop model, including ports, speed, and security.
Information on the device's physical dimensions, weight, power, and operating conditions.
To Next Page