Linksys Velop WHW03 User Manual

19
Notes:
For regulatory, warranty, and safety information, go to Linksys.com/support/Velop.
Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can
vary, including lower wireless network capacity, data throughput rate, range and coverage.
Performance depends on many factors, conditions and variables, including distance from the access
point, volume of network traffic, building materials and construction, operating system used, mix of
wireless products used, interference and other adverse conditions.
BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of
companies. Third-party trademarks mentioned are the property of their respective owners. Licenses
and notices for third party software used in this product may be viewed here:
http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-
us/gplcodecenter for questions or GPL source code requests.
© 2016 Belkin International, Inc. and/or its affiliates. All rights reserved.
LNKPG-xxxxx

Linksys Velop WHW03 Specifications

General

Wi-Fi Technology	802.11ac
Coverage	Up to 2, 000 sq ft per node
Processor	716 MHz Quad-core
Security	WPA2 Personal
MU-MIMO	Yes
Beamforming	Yes
Guest Access	Yes
Parental Controls	Yes
Dimensions	3.1 x 3.1 x 7.3 inches per node
Maximum Data Transfer Rate	2200 Mbps
Memory	512 MB RAM, 4 GB flash
Ports	2x Gigabit Ethernet ports
Wi-Fi Speed	AC2200 (867 + 867 + 400 Mbps)
Wi-Fi Bands	2.4 GHz and 5 GHz
Antennas	6 internal antennas
Product Type	Mesh Wi-Fi System
Number of Nodes	1, 2, or 3 nodes
Coverage Area	Up to 6, 000 sq ft with 3 nodes
Compatibility	Works with any modem