Linksys VELOP User Manual

7
Note—During setup we’ll send a verification email. From your home network, click the link in the
email.
Other than plugging in the power and the ethernet cables, the app-based setup process does the
work for you. Once connected, use the app to personalize your Wi-Fi by giving it a name and
password. You also can give nodes names based on where they are so you can identify them in the
rare case where things need attention.
What you’ll need

Linksys VELOP Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Modulation	256-QAM
Fit AP mode features	Dual-MPP mesh networking, Mesh networking
Networking standards	IEEE 802.11a, IEEE 802.11ac
WLAN channel features	WLAN channel management
Ethernet LAN data rates	1000 Mbit/s
Maximum data transfer rate	1267 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Maximum data transfer rate (2.4 GHz)	400 Mbit/s
Flash memory	256 MB
Management platform	Linksys
Internal	No
Placement	Table
Certification	FCC, IC, CE
Product color	White
LED indicators	Power, Status
Housing material	Plastic
Security algorithms	WPA2-PSK
Service Set Identifier (SSID) features	Hidden SSID
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Antenna features	Integrated antenna
Antennas quantity	3
Cables included	LAN (RJ-45)
Number of products included	1 pc(s)
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	78.74 mm
Height	139.7 mm
Weight	320 g