Linksys WMP54GX Quick Installation Guide

15
Setting Up the Adapter with an
Available Network
The available networks are listed in the
table on the center of the screen by
SSID. Select the wireless network you
wish to connect to and click
Connect .
(If you do not see your network listed,
you can click
Refresh to bring the list
up again.) If the network utilizes wireless
security, you will need to configure
security on the Adapter. If not, you will
be taken directly to the
Congratula-
tions
screen.
A If wireless security has been
enabled on this network, you will
see a wireless security screen. If
your network uses WEP (Wired
Equivalent Privacy) encryption,
the
WEP Key Needed for Con-
nection
screen will appear. If
your network uses WPA Personal
or WPA2 Personal security, a
screen will appear for one of
those encryption methods.
WEP Key Needed for Connec-
tion
Select the level of encryption
you want to use,
64-bit or 128-
bit
.
Then, enter a passphrase or WEP
key.
Passphrase - Enter a passphrase
in the Passphrase field, so a WEP
key is automatically generated.
Available Wireless Network
WEP Key Needed

Linksys WMP54GX Specifications

General

Brand	Linksys
Model	WMP54GX
Category	PCI Card
Language	English