2
1
Begin Installation
The PCI Adapter is installed and set
up using the Setup Wizard that
comes on the CD enclosed.
A To begin, insert the Setup
Wizard CD-ROM into your CD-
ROM drive. The Setup Wizard
should run automatically, and
the Welcome screen should
appear.
B To install the Adapter, click
Click Here to Start on the
Welcome screen.
C After reading the License
Agreement, click Next to
continue the installation and
Windows will begin copying the
files onto your PC.
D The Setup Wizard will now
prompt you to install the
Adapter into your PC. Click
Next and your PC will power
down.
Proceed to Step 2.
A
C
IMPORTANT: Do not install the Adapter in your PC
until you are instructed to do so in Step 2 or the
Adapter will not install correctly.
To Next Page
Loading...
Need help?
General
