Linksys WMP54GX Quick Installation Guide

5
WEP Key Needed
A If wireless security has been
enabled on this network, you will
see a wireless security screen. If
your network utilizes WEP (Wired
Equivalent Privacy) encryption, the
WEP Key Needed for Connection
screen will appear. If your network
utilizes WPA Personal (Wi-Fi Pro-
tected Access), the
WPA Personal
Needed for Connection
screen will
appear.If your network utilizes PSK2
(Pre-Shared Key 2) encryption, the
PSK2 Key Needed for Connection
screen will appear.
WEP Key Needed for Connection
Select 64-bit or 128-bit .
Then, enter a passphrase or WEP
key.
Passphrase - Enter a passphrase in
the
Passphrase field. This is case-
sensitive and should not be longer
than 16 alphanumeric characters.
It must match the passphrase of
your other wireless network devices
and is compatible with Linksys wire-
less products only. (Non-Linksys wire-
less products, require a WEP key to
be entered.)
WEP Key - The WEP key must match
the WEP key of your wireless net-
work. For 64-bit encryption, enter
exactly 10 hexadecimal charac-
ters. For 128-bit encryption, enter
exactly 26 hexadecimal charac-
ters. Valid hexadecimal characters
are “0” to “9” and “A” to “F”.
Then, click
Connect and proceed
to Step B.

Linksys WMP54GX Specifications

General

Brand	Linksys
Model	WMP54GX
Category	PCI Card
Language	English