Troubleshooting
Find more help from our award-winning customer support at linksys.com/support/WRT32X.
Setup was unsuccessful
If you were not successful with the browser-based setup wizard: ·
Press and hold the Reset button on your router with a paperclip or pin for 10 seconds. Restart the setup wizard.
Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router
again.
If you have another computer, use that computer to install the router again.
“Your Internet cable is not plugged in” message
Make sure that an ethernet cable (like the one included with your router) is securely connected to the yellow
INTERNET port on the back of the router and to the appropriate port on your modem or modem router. See
Step 4 (p. 8) in setup instructions.
To Next Page
Loading...
