Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it
is set to the ON or l (as opposed to O) position.
If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable
provided by your ISP.
If your Internet service is DSL, make sure the DSL line is connected to the modem’s DSL port.
If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.
Install the router again.
“Cannot access your router” message
To access your router’s administrative tool, you must be connected to your router’s network. If you currently have
wireless internet access, the problem may be that you have accidentally connected to a different wireless network.
To fix the problem on Windows computers*:
1. Click on the wireless icon in the system tray to see a list of available Wi-Fi networks.
2. Click your own network name. Click Connect. In the example below, the computer was connected to another
wireless network named wraith_5GHz. The wireless network name of the Linksys WRT32X router,
To Next Page
Loading...
