30
Chapter 5: Configuring the Wireless-G Broadband Router
The Administration Tab - Firmware Upgrade
Wireless-G Broadband Router with SRX
The Administration Tab - Firmware Upgrade
Firmware can be upgraded by clicking the Upgrade button after browsing for the firmware, which you can
download from the Linksys website. Do not upgrade your firmware unless you are experiencing problems with
the Router. For more information about upgrading firmware, refer to “Appendix C: Upgrading Firmware”.
The Administration Tab - Config Management
The Config Management screen allows you to backup the Router’s settings and restore them later. Simply, click
the Backup button and save the config file to your hard drive. When you wish to restore the config file, click the
Browse button to locate the file and then click the Restore button.
Figure 5-34: Administration Tab - Firmware Upgrade
download: to receive a file transmitted over a network
firmware: the programming code that runs a networking device
Figure 5-35: Administration Tab - Config Management
To Next Page
Loading...
