71
Appendix I: Regulatory Information
Wireless-G Broadband Router with SRX
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency
Allocation Table for Italy. Unless operating within the boundaries of the owner’s property, the use of this 2.4 GHz
Wireless LAN product requires a ‘general authorization’. Please check with http://www.comunicazioni.it/it/ for
more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di
ripartizione delle frequenze in Italia. Se non viene installato all’interno del proprio fondo, l’utilizzo di prodotti
Wireless LAN a 2.4 GHz richiede una “Autorizzazione Generale”. Consultare http://www.comunicazioni.it/it/ per
maggiori dettagli.
Product Usage Restrictions
This product is designed for indoor usage only. Outdoor usage is not recommended.
This product is designed for use with the included integral or external (dedicated) antenna(s). Use of non-
dedicated or third-party antenna(s) is not recommended and is not supported by Linksys.
Power Output of Your Device
To comply with your country’s regulations, you may have to change the power output of your wireless device.
Proceed to the appropriate section for your device.
Wireless Adapters
Wireless adapters have the power output set to 100% by default. Maximum power output on each adapter does
not exceed 20 dBm (100 mW); it is generally 18 dBm (64 mW) or below. If you need to alter your wireless
adapter’s power output, follow the appropriate instructions for your computer’s Windows operating system:
Note: The power output setting may not be available on all wireless products.
For more information, refer to the documentation on your product’s CD or at
http://www.linksys.com/international.
To Next Page
Loading...
Need help?
General
