WRVS4400N User Guide 102
Status Tab
Setting Up and Configuring the Router
Status Tab
The Status Tab provides current status on this Wireless Router including WAN, LAN, Wireless
LAN, System Performance, VPN client connections, and IPsec VPN connections.
WAN / Gateway
This screen provides some basic information on the Wireless Router (e.g. firmware version,
time) and WAN port MAC/IP address and connection status.
Firmware Version—Displays the current firmware version.
MAC Address—Displays the WAN port MAC Address, as seen by your ISP.
Current Time—Displays the time on this Wireless Router according to your settings on the
Setup->Time tab.
Internet Connection
Connection Mode—Displays the Internet connection type setting on WAN port.
Interface—Displays the WAN port Interface status (Up or Down).
IP Address—Displays the WAN port IP Address.
Subnet Mask—Displays the WAN port IP subnetmask.
Default Gateway—Displays the default Router to reach Internet or other networks from the
WAN port.
DNS—The DNS (Domain Name System) IP addresses currently used by the Wireless Router.
DHCP Release button—Click this button to release IP address on WAN port if using DHCP.
To Next Page
Loading...
