WRVS4400N User Guide 19
Connection Instructions
Connecting the Router
Connection Instructions
1. Before you begin, make sure that all of your hardware is powered off, including the Router,
PCs, hubs, switches, and cable or DSL modem.
2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of
the Router. Connect the other end to an Ethernet port on a network device, e.g., a PC, print
server, hub, or switch.
3. Repeat this step to connect more PCs or other network devices to the Router.
4. Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port.
To Next Page
Loading...
