WRVS4400N User Guide 144
Configuring PC 1 and PC 2
15. Click the Save Settings button on the IPSec VPN screen.
Configuring VPN Router 2
For VPN Router 2, follow the same instructions as you did for configuring VPN Router 1.
Configuring PC 1 and PC 2
1. Set PC 1 and PC 2 to be DHCP clients (refer to Windows Help for more information).
2. Verify that PC 1 and PC 2 can ping each other (refer to Windows Help for more information).
If the computers can ping each other, then you know the VPN tunnel is configured correctly.
You can select different algorithms for the encryption, authentication, and other key
management settings for VPN Routers 1 and 2.
To Next Page
Loading...
