Linn AKURATE DS System Installation And Setup Manual

Final steps
1. Turn on the NAS.
2. Turn on the Ethernet switch and the Wireless Access Point.
3. Wait for the NAS to finish booting.
4. Turn on the Akurate Kontrol and wait for the standby symbol to
appear on the front panel.
5. Turn on the Akurate DS and the rest of the hi-fi system.
6. Turn on the wireless control point and start the Linn GUI.
7. Follow the instructions in the Operation chapter of the Akurate DS
owner’s manual.
9 FINAL STEPS
www.linn.co.uk
AKURATE DS SYSTEM
INSTALLATION AND SETUP
This section describes the final steps involved in getting the Akurate DS
system up and running.
29

Linn AKURATE DS Specifications

General

Type	Network Music Player
Audio Formats	FLAC, WAV, MP3, WMA, AIFF, AAC, OGG
Streaming Services	Qobuz, Tidal
Digital Outputs	1 x S/PDIF
Analog Outputs	RCA
Network Connectivity	Ethernet
Sample Rates	Up to 24-bit/192kHz