11
The KELTIK AKTIV crossover and KELTIK loudspeaker normally need no maintenance. On no account
should you try to remove any of the drive units. Should any problems arise, please contact your
supplier.
Problems with the loudspeakers such as blown drive units can easily be solved by your dealer without
removing the loudspeakers from your home. Should it become necessary to transport the loudspeakers,
please use the original packing to reduce the risk of damage. If you have lost the original packing, your
dealer can supply you with a replacement set.
CLEANING Dust or finger marks can be removed using a soft slightly damp cloth. Avoid the use of
domestic cleaning fluids.
WARNING Disconnect the mains supply from the KELTIK AKTIV crossover first.
FUSE If the fuse in the mains inlet connector of the crossover should blow, replace it with the correct
type only. To replace the fuse, first switch off and disconnect the mains lead. Open the door on the
mains inlet connector by inserting a small flat-blade screwdriver in the slot at the top and levering it open.
DO NOT REMOVE OR TURN THE VOLTAGE SELECTOR BARREL. Pull out the fuse-holder and replace
the blown fuse with the spare fuse provided. Replace the fuse-holder, with the arrow pointing right, and
snap the door shut
If the new fuse blows, there may be a fault and the complete unit should be returned to your Linn dealer.
To Next Page
Loading...