BELT. The belt should last for at least five years of
regular use. The belt can be cleaned at the same time
as the pulley is cleaned. The best method of cleaning a
belt is by pulling it through a damp cloth.
OIL. The oil supplied for the bearing provides life-long
protection. If oil is lost from the bearing housing, it
should be replaced by factory-supplied oil (available
from your dealer). The turntable should never be
operated without oil.
DUST COVER. This can be cleaned using any of the
commercially available acrylic or plastic cleaners. The
simplest approach is to remove any dust with a damp
tissue without any rubbing action and then use a soft
duster. Covers are more often damaged in cleaning
than in use.
To Next Page
Loading...
