Linn Uphorik - User Manual

Uphorik Quickstart Guide
Thank you for purchasing the Linn Uphorik phono pre-amplifi er. This quickstart
guide provides basic unpacking and connecting info to get you started - full
instructions are available in the Uphorik Online Manual.
IMPORTANT:
This sheet contains guidance on unpacking and setting up your phono pre-
amplifi er. Please refer to the printed Safety Information booklet for important
safety information and the online manual for full instructions on using the Up-
horik phono pre-amplifi er.
Unpacking
Remove product from packaging and place on a fl at surface•
Please retain all packaging for future transport of Uphorik•
Contents
1 x Uphorik phono pre-amplifi er•
1 x Mains cable •
1 x pair of Linn Black interconnect cables•
1 x Important Safety Info booklet•
1 x foam protector•
Positioning
Place product on a fl at, stable and rigid surface•
Use the foam protector to protect the top of unit when changing cartridge •
settings on underside of Uphorik
Ensure the tonearm cable is not too close to mains, loudspeaker or inter-•
connect cables
Do not stack components and avoid placing near other heat sources•
Allow a little space all the way around the product for air circulation•
Connecting
Before making any connections, switch off your power amplifi er(s).1.
Connect using your preferred connection type (Phono/RCA or Balanced/XLR) 2.
for your cartridge type (Moving Magnet (MM) or Moving Coil (MC)).
Set the MM/MC Switch to the correct setting3.
Connect your mains cable and switch the unit on4.
Power Switch - turn on and off
Mains Input - connect the mains cable
MM Input (L/R) - Phono/RCA
Earth Ground - connect to an earthing lead to improve earth bonding
MM Input (L/R) - Balanced/XLR
Balanced/XLR Output (L/R)
MC Input (L/R) - Phono/RCA
MC Input (L/R) - Balanced/XLR
Unbalanced/RCA Output (L/R)
MM/MC Switch - push in for MC; push out for MM
BALANCED
LEFT INPUT LEFT OUTPUTRIGHT INPUTRIGHT OUTPUT
MM UNBALANCEDMCUNBALANCED MCBALANCED
OFF
ON
POWER
EARTH
GROUND
MMMM
MCMCMM
MC
MM
3
2
1
4
5
7
8
9
10
6

Summary

Connecting

Power Switch

Turn the unit on and off.

Mains Input

Connect the mains power cable here.

MM Input (Phono;RCA)

Phono/RCA connection for Moving Magnet cartridges.

Earth Ground

Connect to an earthing lead for improved earth bonding.

MM Input (Balanced;XLR)

Balanced/XLR connection for Moving Magnet cartridges.

Balanced;XLR Output

Balanced/XLR audio output connection.

MC Input (Phono;RCA)

Phono/RCA connection for Moving Coil cartridges.

MC Input (Balanced;XLR)

Balanced/XLR connection for Moving Coil cartridges.

Unbalanced;RCA Output

Unbalanced/RCA audio output connection.

MM;MC Switch

Switch for selecting MM or MC cartridge type.

Unpacking

Positioning

Cartridge Settings

ADIKT Settings

Optimum switch settings for the Linn ADIKT cartridge.

AKIVA Settings

Optimum switch settings for the Linn AKIVA cartridge.

KLYDE Settings

Optimum switch settings for the Linn KLYDE cartridge.

Operation

Online Manual

Warranty Information

Linn Records

Linn Uphorik Specifications

General

Brand	Linn
Model	Uphorik
Category	Amplifier
Language	English