Need help?Do you have a question about the Linn Klout and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| Total Harmonic Distortion | < 0.01% |
| Signal to Noise Ratio | > 100 dB |
| Input Impedance | 10 kOhms |
| Damping Factor | > 100 |
| Power Output (4 Ohms) | 200W |
| Power Output (8 Ohms) | 100 Watts |
Highlights the importance of keeping hi-fi system electrical contacts clean, suggesting occasional unplugging/re-plugging.
Recommends using good quality copper cables for interconnects and specific speaker cables like Linn K20.
Explains the fuse fitted to the power input socket and the location of a spare fuse.
Details the KLOUT's protection against overload, short circuits, and over-temperature, and actions to take.
Details the power output of the KLOUT amplifier at different impedance levels: 80W into 8 Ohms, 160W into 4 Ohms.
To Next Page
