Linn KNEKT ROOMAMP 2 User Manual (English)

To Next Page

❙ Enables a remote room to receive source and control

signals from the main system

❙ High quality combined line receiver and twin stereo

power amplifiers

❙ Provides three inputs to amplify and control local sources

in a secondary room and sub-zone

❙ Provides connection of an additional RCU to allow

independent control of volume and power in a sub-zone

❙ Upgradeable - can be used with external amplification if

more power is required for critical listening areas

❙ Compact unit that can be screwed onto a surface or rack

mounted for discreet installation

❙ Compatible with networked CLASSIK products to provide

a simple multi-room solution with additional sub-zone

control

❙ Controllable via RS232

KEY FEATURES INCLUDE

KNEKT

multi-room audio distribution systems from

Linn offer customisable solutions for all levels of

performance, providing pitch-accurate audio playback

throughout the complete installation.

The KNEKT

ROOMAMP 2 is a high quality 20W

twin stereo power amplifier. It offers reception, con-

trol and amplification of audio signals in one silent,

compact unit, for no compromise sound reproduction

in a secondary zone.

Source and control signals are distributed from a

KNEKT

LINE DRIVER or INTERSEKT audio

distribution unit in the main system to the KNEKT

ROOMAMP 2 in the secondary room. Local control

of the system is facilitated by Linn’s versatile range of

stylish Room Control Units (RCUs). The KNEKT

system’s unique 2-way data path provides feedback

to the user, and is displayed on the KNEKT RCU, for

clear system control.

Up to 3 local sources such as Satellite, VCR, or CD

player can be added in the secondary room via the

KNEKT

ROOMAMP 2. A tape output permits

source programme recording, as well as connections

for external power amplification, making the unit

extremely versatile and flexible whilst offering

upgrade potential in critical listening areas.

KNEKT

ROOMAMP 2 allows for the connection

and independent control of power and volume in

sub-zones, such as an en-suite bathroom or

conservatory. Because there is no need for an

additional room amplifier in the sub-zone, only

speaker and control cable is required to be run for

this area. Short loudspeaker cable runs ensure that

pitch accurate performance is maintained.

The unit supports mute triggers which are fully

configurable to mute the zone, sub-zone or

headphones, or a combination of these functions,

when integrated with third-party systems or

connected with a remote headphone socket.

KNEKT

ROOMAMP 2

SPECIFICATION

Multi-room audio distribution component, providing reception, control and

amplification of main and local sources in secondary rooms

1, 2, 3 & 4 KNEKT

ROOMAMP 2

Linn, the Linn logo and KNEKT

are registered trademarks.

Need help?

Do you have a question about the Linn KNEKT ROOMAMP 2 and is the answer not in the manual?

Linn KNEKT ROOMAMP 2 Specifications

Power

power supply	100Vac - 120Vac @ 50/60Hz +/-10%, 220Vac - 240Vac @ 50/60Hz +/-10%
output power	20W into 4Ω per channel
power consumption	120W maximum, 15W typical power use
fuse rating	1.6 Amp

Electrical Characteristics

output impedance	300Ω
headphone output impedance	<16Ω
headphone output current limits	30mA
load tolerance	8Ω to 2Ω
power amplifier voltage gain	28.5dB

Weight and Dimensions

dimensions	345mm x 274mm x 44.5mm, 13.6 inches x 10.8 inches x 1.8 inches
space requirement	385mm x 354mm x 124.5mm, 15.2 inches x 13.9 inches x 4.9 inches
weight	2.2kg / 4.9lbs
rack mount height	1 unit

View in Manual