Why is there no sound from my Linn Amplifier?
If there's no sound from the speakers, verify that the MUTE indicator isn't active and ensure your audio source is playing and the correct source is selected.
Power| mains input range | 100-115 Vac @ 50/60 Hz +/- 10%, 220-240 Vac @ 50/60 Hz +/- 10% |
|---|---|
| power consumption | 8 W maximum |
| fuse rating | T800mA |
Audio Specifications| audio input impedance (Input 1) | 47 k Ohms in parallel with 68 pF |
|---|---|
| audio input impedance (Inputs 2-10) | 50 K Ohms |
| maximum input level | 2.5 V rms |
| nominal input levels (Input 1) | 2.5 mV rms |
| nominal input levels (Inputs 2-10) | 2V rms |
| output impedance (Line output) | 300 Ohms |
| output impedance (Tape output) | 100 Ohms |
| gain (Input 1) | 45 dB maximum @ 1 kHz |
| gain (Inputs 2-10) | 10 dB maximum |
| tape output gain | 36 dB from input 1 @ 1 kHz, 0 dB from inputs 2-10 |
| gain control range | 60 dB in 1 dB steps |
| response adjustments (Bass) | +/- 10 dB at 40 Hz |
| response adjustments (Treble) | +/- 10 dB at 20 kHz |
Weight and Dimensions| height | 80 mm |
|---|---|
| width | 320 mm |
| depth | 325 mm |
| weight | 4 kg |
Warning to reduce electric shock risk by not removing the cover.
Warning to reduce fire or electric shock risk by not exposing to rain or moisture.
Information on mains plugs, wiring, and disposal.
Instructions for replacing the fuse in the mains plug.
Steps for replacing the mains plug and wiring instructions.
Instructions on how to replace the internal fuse of the preamplifier.
Instructions for replacing the two fuses within the KOLEKTOR unit.
Troubleshooting steps for when no audio output is heard.
To Next Page
