EasyManuals Logo

Linn Kolektor User Manual

Linn Kolektor
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
i
Important safety information
Explanation of symbols used in this manual and on the product:
This symbol is intended to alert the user to the presence of
uninsulated dangerous voltages within the enclosure of sufficient
magnitude to cause electric shock.
This symbol is intended to alert the user to the presence of
important maintenance and servicing information in the instruction
and service manuals.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE
COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: SHOCK HAZARD. DO NOT OPEN.
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
MAINS PLUGS
This appliance is supplied with a non-rewireable mains plug for the
intended country.
Replacement mains leads can be obtained from your Linn retailer.
Should you need to change the plug please dispose of it carefully.
A plug with bared conductors is dangerous if engaged in a live socket.
The Brown wire must be connected to the Live (Line) supply pin.
The Blue wire must be connected to the Neutral supply pin.
The Green/Yellow wire must be connected to the Earth (Ground) supply
pin.
Please contact your retailer or a competent electrician if you are in any
doubt.

Other manuals for Linn Kolektor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linn Kolektor and is the answer not in the manual?

Linn Kolektor Specifications

Power IconPower
mains input range100-115 Vac @ 50/60 Hz +/- 10%, 220-240 Vac @ 50/60 Hz +/- 10%
power consumption8 W maximum
fuse ratingT800mA
Audio Specifications IconAudio Specifications
audio input impedance (Input 1)47 k Ohms in parallel with 68 pF
audio input impedance (Inputs 2-10)50 K Ohms
maximum input level2.5 V rms
nominal input levels (Input 1)2.5 mV rms
nominal input levels (Inputs 2-10)2V rms
output impedance (Line output)300 Ohms
output impedance (Tape output)100 Ohms
gain (Input 1)45 dB maximum @ 1 kHz
gain (Inputs 2-10)10 dB maximum
tape output gain36 dB from input 1 @ 1 kHz, 0 dB from inputs 2-10
gain control range60 dB in 1 dB steps
response adjustments (Bass)+/- 10 dB at 40 Hz
response adjustments (Treble)+/- 10 dB at 20 kHz
Weight and Dimensions IconWeight and Dimensions
height80 mm
width320 mm
depth325 mm
weight4 kg

Related product manuals