Linsar 40LED320 - Main Menu and Initial Setup; Common Initial Settings Procedure; First Time Installation Guide

22
● The unit contains different setting menus. Once the initial programming is entered, it will
be remained in the memory until changed, and the unit can always be operated under the
same conditions.
● This settings will be remained in the memory until the settings are changed even after
setting the player to standby mode.
Common procedure for initial settings
- Press MENU button on the unit or remote control to display the main menu.
- Press LEFT or RIGHT navigation button to select different menus.
- Press UP or DOWN navigation button to select the item that want to adjust.
- Press OK button to enter adjusting menu page.
- Press MENU button to save current setting and return to previous menu page.
- Press EXIT button to exit menu page.
First Time Installation
- Connect to power source and turn on this TV, then below setup page will display on the
screen:
Language
- Press LEFT/RIGHT navigation button to select desired
on-screen display language.
Country
- Press LEFT/RIGHT navigation button to select the country
you’re living in.
Environment
- Press LEFT/RIGHT navigation button to select Home or
Store mode.
Auto Tuning
- Press OK button to start auto tuning.
MAIN MENU