Linsar LS32CHD12V - User Manual

Questions and Answers

D
davidhullAug 16, 2025
How to fix sound issues on Linsar HDTV?
- R
  Rachel BradleyAug 16, 2025
  To resolve sound issues with your Linsar HDTV, ensure all equipment is properly connected and the TV input setting is correct. Verify the source input and audio settings on any external devices. Make sure the volume isn't muted; if it is, press the /MUTE button. Unplug earphones if connected. Adjust the volume using the VOL+ / VOL- buttons. If using an external audio device, check that Menu > Sound > S/PDIF is set to 'PCM'. For HDMI connections, ensure the audio device supports HDMI-ARC. If the sound is out of sync with the picture, adjust the sync in Menu > Sound > Sound Delay.
C
Chad KramerAug 19, 2025
What to do if I have picture issues with my Linsar HDTV?
- D
  Deborah GrayAug 19, 2025
  To fix picture issues on your Linsar HDTV, ensure all equipment is connected correctly. If using an external device, try turning it off and on again. Select the correct source input if the screen displays 'no signal'. Adjust the antenna position. Move the TV away from other electronic devices that may cause interference. Auto-tune the free-to-air TV channels again, or try switching to another channel.
R
Ricky GomezAug 22, 2025
Why my Linsar HDTV does not recognise my USB device?
- C
  clarkdustinAug 22, 2025
  If your Linsar HDTV does not recognize your USB device or external hard disk, first consult the instructions on using USB devices with the TV. If the problem persists, the USB device may be incompatible. This TV has been tested with many Flash memory-based devices and hard disks, but some, especially external self-powered hard disks, may not be compatible. Ensure the USB storage device is formatted in the FAT32 file system provided with Windows. Devices formatted by other utilities may not be recognized.
J
Jessica WilsonAug 26, 2025
What to do if button operation is not effective on Linsar HDTV?
- O
  ocoxAug 26, 2025
  If your Linsar HDTV button operation is ineffective, it may be due to lightning, static electricity, or other factors. Disconnect the power plug and then reconnect it to resolve this issue.
A
Angel MartinezAug 28, 2025
What does 'Disk not ready' error mean on Linsar HDTV?
- J
  Jose ShannonAug 28, 2025
  If your Linsar HDTV displays a 'Disk not ready' error, especially in time-shift recording mode, it may be due to a scheduled recording issue. Remove the USB recording device, as it needs to reset after each recording to prevent damage. Reconnect the device and proceed with your recording.
L
lhouseAug 31, 2025
Why Linsar HDTV DVD won't play?
- K
  Kristin PopeAug 31, 2025
  If your Linsar HDTV won't play a DVD, make sure the DVD region code is compatible with the TV.
T
tracey20Sep 3, 2025
Why is my media loading slowly on Linsar HDTV?
- K
  Kathryn MendezSep 3, 2025
  If your Linsar HDTV media is loading slowly, it may be due to large file sizes or large capacity storage devices. The recognition speed of a USB storage device can also vary depending on the device.
D
Donna RamirezSep 6, 2025
What does 'unsupported file' message mean on Linsar HDTV?
- R
  riveracassandraSep 6, 2025
  If your Linsar HDTV displays an 'unsupported file' message, it means the file extension, video codec, image resolution, or frame rate is not supported by the TV.
K
Karen CookSep 9, 2025
How to troubleshoot no power on Linsar HDTV?
- B
  Benjamin HillSep 9, 2025
  To address a 'no power' issue with your Linsar HDTV, first check that the power outlet is turned on. If you're using a multi-outlet, ensure it's working correctly by plugging the TV directly into a wall outlet to see if the white indicator light turns on. Also, try powering on the TV using the button on the TV itself.
M
Michael OdomSep 12, 2025
Why cannot change angle during DVD playback on Linsar HDTV?
- E
  Erica ChaseSep 12, 2025
  This function depends on software availability. Even if a disc has a number of angles recorded, they may be recorded for specific scenes only.