Linsar LS24CFHD12V User Manual (English)

Questions and Answers:

K
Kevin RomeroAug 2, 2025
What to do if my Linsar HDTV won't turn on?
- A
  Annette RamirezAug 2, 2025
  If your Linsar HDTV won't turn on, please check the following: * Ensure the AC power cord is securely plugged into the wall outlet. * Verify the wall outlet is turned on and the power indicator at the bottom of the TV is lit. * If using a multi-outlet, check if it is working properly. To check whether a power strip is working properly, plug the TV’s power plug directly to a wall outlet and observe its operation. * Try to power on using the power button on the TV.
A
Anthony GrahamAug 6, 2025
What to do if there is no picture or sound from an external device on my Linsar HDTV?
- S
  Susan MartinezAug 6, 2025
  If you are experiencing issues with picture or sound from an external device connected to your Linsar HDTV, try these steps: * Ensure that the connection to the device is correct and that all cables are fully inserted. * Remove and reconnect all cables connected to the TV and the external devices. * Try new cables if possible. * Restart the connected devices by unplugging each device's power cord and then plugging it in again. * If 'No Signal' is displayed on the TV, ensure that the correct input source has been selected. * When using the component cable, confirm that the green (Y), blue (Pb) and red (Pr) jacks are plugged into their proper connectors.
M
Mary ChavezAug 10, 2025
How to fix no picture or sound in DTV mode on Linsar LS24CFHD12V HDTV?
- B
  briggsbillyAug 10, 2025
  If you're experiencing no picture or sound, or distorted picture/sound in DTV mode on your Linsar HDTV, try the following: * Ensure the antenna cable is securely connected to the TV and to the wall outlet. * Ensure the input source is set to DTV. * If 'No Signal' is displayed, run Menu > Channel > Auto Scan to search for channels. * If some channels are missing, run Menu > Channel > Auto Scan or manually search by Menu > Channel > Digital Manual Scan. * Try a different antenna cable or another TV if possible. * Move the TV away from electronic equipment or devices that could cause interference. * Adjust the antenna position.
R
Renee BrownAug 19, 2025
How to troubleshoot a Linsar LS24CFHD12V remote control that is not working?
- K
  Kathryn JordanAug 19, 2025
  If your Linsar HDTV remote control isn't working, try these steps: * Make sure that the batteries are installed with their poles (+/–) in the correct direction. * Remove any obstacles between the remote control and remote control sensor on the TV. * Check if the power indicator at the bottom of the TV blinks when you press the remote's power button. If it does not, replace the remote control's batteries. * Try pointing the remote directly at the remote control sensor from 1.5-1.8m away.