DVD MODE | 45
Audio Setup Page
Downmix: Use this item to select the desired audio
output mode.
Available options:
LT/RT: Left/Right mix mode
Stereo mode.
Preference Setup Page
TV Type: Select the TV system.
Audio: Use this item to select the desired audio
language, if your disc contains multiple audio
languages.
Disc Menu: Use this item to select the desired
language of your disc menu, if your disc menu
contains multiple menu languages.
Program Control: Use this item to select the desired
program rating.
Password: Use this item to change the password.
Input the password using the number buttons on the
remote control. The default password is “0000”.
NOTE: If you forget the password, please use the
master password “4711”.
Default: Use this item to reset to factory settings.
Use the / / / buttons to adjust the item, then
press OK to confirm the setting.
Press the D.SETUP button again to close the setup
menu.
Use the / buttons to switch to another main setup
item. Then press the or OK button to enter the
submenu page.
Press the button to return to the previous menu
page.
General Setup Page
TV Display: This setting is for selecting the TV output
mode. Available options:
Normal/PS (Pan & Scan mode), Normal/ LB (Letter
Box mode),
Wide: 16:9 (Wide Screen mode).
OSD Language: This is for choosing your desired OSD
language.
Screen Saver: Set to ON, a screen saver will appear if
the unit is left idle and no operation is carried out for
five minutes.
Last Memory: Enter another input source (except
USB) during disc playback, and then back to DVD
input source again, this unit will resume playback
from the point where last playback was stopped, if
Last Memory is set to ON.
To Next Page
Loading...
